top of page

SMARC-FiMX6 模組式計算機

起始價格

價格

$113.00

SMARC-FiMX6 模組具有高度可擴充性，搭載單核心、雙核心精簡版、雙核心或四核心 NXP（飛思卡爾）i.MX6 處理器，效能範圍極為廣泛。它們基於 ARM Cortex A9 技術，支援種類繁多的行業標準接口，同時提供先進的多媒體和高速連接功能，使其幾乎適用於無限的應用場景。
SMARC-FiMX6 同時支援 SMARC 1.0 和 SMARC 1.1 標準。

特徵 ：

  • Freescale i.MX6 Cortex-A9 Solo、Dual-Lite、Dual 與 Quad 1GHz
  • 1GB DDR3L（可選 2GB，單通道 512MB），8GB eMMC 快閃記憶體，1 個 SD/MMC 插槽，1 個 SATA（D/Q）接口
  • 並行 18/24 位元 RGB，24 位元雙通道。 LVDS，HDMI
  • 1 個 10/100/1000Mbps 乙太網路介面
  • 2 個 CAN 介面、4 個 UART 介面、5 個 I2C 介面、2 個 I2S 介面、1 個 PCIe 介面、12 個 GPIO 介面、2 個 SPI 介面、4 通道串列攝影機接口

SMARC-FiMX6.pdf

應用領域：

  • 人機介面（HMI）
  • 後座娛樂系統
  • 貨運娛樂
  • 物聯網（IoT）
  • 醫用CT掃描儀
  • 數位看板
  • 銷售點
  • 顯示單元
  • 通用控制系統
  • 智慧電網
  • 暖通空調控制系統

開發評估工具包 ：

評估載板現已推出： SMARC1.x EVK-STD-CARRIER 標準評估板

CPU核心

記憶體

誘惑

保形塗層

數量

折扣訊息

產品資訊

交貨時間：有貨，7~21天
產品 ID：SMARC-FiMX6-SIC

技術規格

Technical Information
Compliance SMARC 1.0
SMARC 1.1
Dimension 82 mm x 50 mm by SMARC Specification
CPU NXP (Freescale) i.MX 6
Solo, Dual Lite, Dual and Quad Core
1GHz (Industrial Temp.: 800Mhz)
GPU Dual Display
HD 1080p Encode/Decode
2D/3D h/w Acceleration
Memory 1GB DDRL (Dual Lite, Dual and Quad)
2GB DDR3L (Dual and Quad only)
512MB DDR3 (Solo)
8GB eMMC (5.0) onboard
4MB SPI NOR Flash onboard
AT24C32 EEPROM onboard
Display Interfaces 24 bit parallel RGB LCD data and control signals
Single channel 18 or 24 bit LVDS LCD or dual channel LVDS LCD
● Panel support signals (I2C, Power Enables, PWM)
● 2nd LVDS channel may be implemented on Carrier board
● Support for dual channel implementations
One HDMI port
MIPI-CSI Camera Interfaces Serial configuration: CSI (4 lanes)
SDIO Interfaces Two SDIO interfaces:
● 4 bit SDIO card interface with support lines
● 8 bit eMMC interface with support lines
SPI Interfaces Two SPI interfaces
I2S Interfaces One I2S interface:
● Typically used for connection to I2S audio CODECs
I2C Interfaces Four I2C interfaces:
● Power Management
● General Purpose
● Camera
● LCD Display ID
HDMI interface also has private I2C interface for
HDMI use
UART Interfaces Four asynchronous serial ports:
● Two with 4 wire handshake (RXD, TXD, RTS#, CTS#)
● Two with data only (RXD, TXD)
Logic level signals
CAN Bus Interfaces Two CAN bus interfaces:
● Logic level signals from Module based CAN bus protocol controllers
● RXD, TXD only
● Two Module GPIOs are designated for optional use as CAN bus error status inputs
USB Interfaces Two USB Ports allow USB 2.0 Host operation (Full Speed and High Speed)
One port allows USB 2.0 OTG (USB client or host)
USB support signals (VBUS enable / Over-current detects, OTG support signals)
SATA Interface *Dual and Quad core only One SATA interface:
● SATA Gen2
SPDIF Interfaces One SPDIF interface:
● SPDIF_IN and SPDIF_OUT available for audio use
PCI Express One PCIe x 1 link
PCIe Gen2
Reference Clock Pair
Full set of PCIe support signals (CLKREQ#, PCIE_RESET#, presence detects)
Could be configured as PCIe target
Common PCIe wake signal
Gigabit Ethernet One analog GBE MDI interface (Qualcomm Atheros AR8035 PHY onboard)
No magnetics on Module
LED support signals
CTREF (center tap reference voltage) for Carrier magnetic
Watchdog Timer Interfaces Standard Linux Watchdog API available.
Real-Time Clock External Seiko S35390A onboard
General Purpose I/O Twelve GPIO signals
Specific alternate functions are assigned to some GPIOs
PWM / Tachometer capability
Camera support
CAN Error Signaling
HD Audio reset
System and Power Management Signals Reset out and Reset in
Power button in
Power source status
Module power state status
System management pins
Battery and battery charger management pins
Carrier Power On control
Boot Source Select Three pins to allow selection from Carrier Board
Select options to include boot from one of the following:
● Module SPI
● Module eMMC Flash
● Module NOR Flash
● Module Remote Boot (Network Port)
● Carrier SPI
● Carrier eMMC
● Carrier SD Card
● Carrier SATA
Software
Linux and Android Based on NXP (Freescale) imx_4.14.98_2.0.0_ga, imx_4.9.88_2.0.0_ga, imx_4.9.11_1.0.0_ga, imx_4.1.15_1.0.0_ga and imx_3.14.28_1.0.0_gaYocto Project SupportUbuntu 14.04/16.04 and Debian 9 SupportAndroid 7.1.2_2.0.0 (Nougat) and Android 6.0.1_2.1.0 (Marshmallow) Support
Power
Power Supply 3V to 5.25V
Operates directly from single level Lithium Ion cells, or fixed 3.3V or 5V power supply
Power Consumption Solo Core (512MB DDR3L): 1.55W
Dual Lite Core (1GB DDR3L): 2.2W
Dual Core (1GB DDR3L): 2.5W
Quad Core (1GB DDR3L): 3.6W
Environment Attributes
Temperature Commercial Temperature: 0°C ~ 60°C
Industrial Temperature: -40°C ~ 85°C
Humidity 10% ~ 90% relative humidity, non-condensed

相關文件

bottom of page